With the factory default setup, the CDR 810 will automatically start recording video when it is turned on. Turn start or stop video recording, press the RE...
Press the MODE button to get into Camera Mode. You should see a camera icon in the upper-left corner of the display. The MODE button is now the shutter but...
Method 1: You can permanently save the current video clip by pressing the orange button. A lock icon will appear on the left side of the screen. The curr...
To record video to the rear, the lens housing must be rotated so that the lens is facing rearward. Grab the lens housing and twist. After rotating the len...
These options can be accessed by pressing the MENU button while in Video Mode. NOTE: The menu is not accessible while a video is being recorded. Resolu...
These options can be accessed by pressing the MENU button while in Camera Mode. Capture Mode This lets you set a delay timer. After pressing the shutt...
The Setup Menu can be accessed by pressing the MENU button 2 times so that the wrench icon at the top of the display is highlighted. NOTE: The Setup Menu i...
These options can be accessed by pressing the MENU button while in Playback Mode. Delete Lets you delete either the current file or all files. Prot...
Most likely you have the Screen Saver enabled which blanks the display after a designated timeout (see the FAQ regarding Setup Menu Options). If you press ...
Vertical alignment can be adjusted by rotating the lens assembly. Grab the lens housing and rotate up or down. Horizontal alignment can be accomplished by...
