GPS data is automatically embedded in the video file. To view GPS information, please use the Cobra Dash Cam Player.
Most likely you have Power Saving Mode enabled which blanks the display after a designated timeout (see the FAQ regarding Setup Menu Options). If you press...
If you see a message that the memory card is full, then it will be necessary to delete files from the memory card. The only reason for the memory card to fi...
This can only happen if numerous files are marked as “protected”. A protected file is permanently saved and will not be deleted. If enough protected files...
The only reason for your unit to turn off is if you are operating on internal battery power. If the battery runs down then the unit will turn off. If Auto-...
The auto-power-off feature works by monitoring the voltage on the power cord. If the CDR830 detects that the supply voltage is gone, then it assumes that t...
While it should be rare for a glitch to occur, it can be easily cleared by pressing the RESET button on the top of your unit. In order to access the RESET ...
To check the firmware version in your unit: 1. If a video is recording then stop the video. 2. Press the MENU button 2 times. The wrench icon should be h...
Please note, you may use a standard SD card. However, for best video quality, we recommend using Class 6 or Class 10 SD cards.
Download the Cobra Dash Cam Player The Cobra Dash Cam Player lets you view your dash cam footage along with GPS and G-Sensor data. The Cobra Dash Cam Playe...
